Still tekniske spørsmål (FAQ)

Hva lurer du på?

Video: 3-Lederstyring ATV320



From main menu,
Enter on dial to go to CONF and enter.
Go down to FULL and enter.
Go down to I_0- and enter.
Set TCC for 3C for 3 wire control.  This will require the enter key(dial) to be pressed for 3 seconds.
In 3 wire control mode, DI1 is normally closed momentary stop and DI2 is normally open momentary start.
If DI1 is not made the drive will display NST.
Var dette nyttig?
Hva kan vi gjøre for å forbedre informasjonen?